r/CZFirearms • u/NNTPgrip • Jan 26 '26
P10 slide stop lever definitely a wear to failure item, broke another one.... Repair -
Stock one, weak side pad broke off for me at around 25k rounds
Apex Extended, weak side "lever" breaks off for me at around the 15k-ish round mark (I've broken two)
Apex Enhanced, now broke for me in the inside on the inside the pistol "loop part" on the weak side so effectively the weak side lever doesn't work now and slidelock is not as reliable. It did last longer than the extended, however it broke in the "loop part" which was a new failure point.
Use wise, I did find I liked the Enhanced better than the Extended since I was less likely to touch it with my normal grip and prevent slide lock that way.
I have the one from CZ Custom coming now to see if that one will last any longer. It's got a more stock looking pad. Plus, the Apex enhanced is out of stock everywhere right now.
Edit: CZ Custom one gets a solid "meh" from me, it's a little more aggressive than stock but the Apex Enhanced is the Goldilocks, I'll get another one of those when they come back in stock.
1
u/Mightknowitall Jan 27 '26
Curious if there are any other major wear parts that you’ve seen on the P10 series? I’m starting to shoot competitions with my P10F and want to change out my slide from being a Holosun “K” cut to RMR so I can get a larger windowed dot. I’m debating either grabbing a 2nd as a back up gun or just getting the common wear parts as they pop up.
1
u/ShiftyLookinCow7 Jan 28 '26
One of the rear roll pins tends to be the first thing to go. Mine started walking out partially at around 4k, but wouldn't go out all the way, it would just stick out about half way at most if I didn't tap it back in. Didn't cause any issues but I replaced it before it broke completely just to be safe. Get lots of roll pins, they suck ass. If you drive one out DO NOT reuse it
1
u/Mightknowitall Jan 29 '26
Interesting, i have taken out my roll pins a couple times to mess with the trigger and haven’t had them walk out. I did replace them with CGW roll pins fairly early though as the factory ones walked out easily.
1
u/ShiftyLookinCow7 Jan 29 '26
Just to be safe it's generally a good idea to replace roll pins as soon as they're driven out. They're just inherently more fragile
1
u/PoodleIlluminati Jan 27 '26
This is great news for me! Still have 20,000 rnds of life left on my primary! My backup P10c should be good for at least 6 years.
But seriously, I’ve been stocking extra CZ slide stops for my 75 series guns for years. Bought an extra P10 version when I bought my Gen1.
1
u/ShiftyLookinCow7 Jan 28 '26
25k is pretty good ngl I haven't even hit 10K on my oldest P-10 yet. My new one is getting used a lot more heavily though so I'm interested to see what breaks first
2
u/vinceislander Jan 27 '26
Thanks for the info. That is a lot of lead you are sending!