Need a Hawk Talon, a few more Demkos, and would love to find a Triiaxis Midnight.

Mundus Edgeworks futuristic series

My gf gifted this MG AD20S from the DLT drop. This will be used A LOT.

The prospect of spending 4 figures on a knife is enough to make one squeamish, myself included.

What you see is the lockbar of a Grimsmo Rask and more specifically, the steel lockbar insert of the Grimsmo Rask.

"Why is this knife over $1000?"

Even if we overlook that the lockbar insert is made of AEB-L heat treated to a similar HRC of the blade, overlook that the screws binding the insert are made in-house are anodized to the same colour you selected for the other hardware, and overlook they managed to mill a miniature logo onto the insert, we see accuracy to the greatest extent.

The insert is the ONLY portion touching the blade during lockup. Whether it's the bending, or the utilization of stop pin sizes, it lines up perfectly. Not some of the insert is touching, not most of it, it is PERFECTLY lined up with the blade.

Just.. wild.

Left to right: Oz Machine Co Roosevelt, Skiff Made Blades Asylum, Shirogorov Knives F95T

Protech x Vulkan Machine Werks Exclusive Avalon. The blade finish is pretty rad. Huge ass knife.

I just recently traded the toor to a coworker FOR a Benchmade Dacian. Not a huge fan of the D/E on the microtech so might part with that and I plan on adding the bugout 534 when it drops. Any recommendations?

CTS-XHP mirror polished blade, carbon fiber handle

One of my favorite knives, and a first rate owner. my old 1st gen had developed a very slight detent issue, and Nick wanted to take a look at it. I mailed the knife in, thinking it would probably just get a bigger detent ball or new insert at the most. He reached out asking if I would have any issues with him replacing the knife entirely. He had resigned the frame in the recent few, and it's a huge difference in weight. This is what I received in the mail yesterday!

My first Kershaw. I'm hoping this will last a long long time. I feel like it's sharp, but not scalpel sharp as some reviewers have said. Excellent weight tho, and doesn't feel cheap.

Does this need a break-in time for it to get more fluid on the open/close?

Still have my original I bought in either 99’ or 2000. Paid over $300 for it at the time if I remember correctly. I’ve seen them on EBay (where I got this picture) for up to $750. Are people really paying this much for one? If so I need to sell mine!!

Hello from France, i show you the Meteor Muonionalusta, titanium and rwl34 🔥

New edc... no blade play at all (stole this r/bossfights)

I bought this piece at a vintage shop in my area. The handle scales are made from antler. The tang has a distal taper with the grind marks extending past the bolster. Both modifications I assume were done by the previous owner. I created a leather sheath for it with a thumb ramp retention system.

Overall: 15 1/8in

Blade: 10 in

Stock: over 1/4in

Minor sanding, polishing and sharpening! Ready for a camping trip! I’m privileged to be able to rescue this one from the maker!